Quickie QM-7 Series Owner's Manual download pdf (Page 22)

118444 Rev. D

QM-710/71 5HD/72 0

Joystick Stationary Time

This is the time the joystick has to remain within the station-

ary range before the unit will come to a stop. It can be pro-

grammed from 0 to 60 minutes in steps of one minute.

Select 0 to disable the function. Default setting is 0

(Disabled).

Joystick Stationary Range

This determines the size of a region around the present joy-

stick position. If the joystick remains within this region for

the stationary time the controller will stop. The range can be

programmed from 1 to 50, in steps of 1. Default setting is 1.

WARNING

Before turning on or adjusting these parameters, carefully read and

understand the implications for use of these features, Joystick

Stationary Time and Joystick Stationary Range. When the “Joystick

Stationary Time” is reached within the “Joystick Stationary Range”,

the drive motors on the chair will shut off. As an example, this will

happen while driving in a straight line for extended periods of time

with no joystick movement. Once the drive motors turn off, the

user will need to turn the chair off and back on to drive.

I. THERMAL ROLL-BACK

Your chair has a thermal roll back circuit. This protects the con-

troller from damage due to overheating. In extreme conditions

(such as repetitive hill climbing) the circuit will decrease the power

to your motors. This allows the chair to operate at a reduced

speed. When the controller cools, the chair will return to normal

speed.

J. POWER RECLINE, TILT & LIFT OPERATION

The power recline, tilt and lift features on your chair can all be

operated using the joystick on your chair. Follow the instructions

below to operate:

If the thru drive option was selected,

1. Make sure your controller is on.

2. From the Drive Mode, press the Mode button to enter

Power Seating Mode.

3. Move the joystick left or right selecting the power option

(recline, tilt, lift, legrests) you wish to control.

4. Move the joystick forward or backward to adjust the select-

ed power option to the desired position.

5. Press the Mode button to return to normal operation or

continue moving the joystick left or right to adjust the next

power option. Multiple Mode button presses will be neces-

sary if other modules, such as Bluetooth or Output, are

active.

F. PERFORMANCE CONTROL SETTINGS

NOTE– BEFORE attempting to check and/or adjust settings on your joy-

stick, be sure to see your Dealer or Clinician and have them

make the adjustments if needed.

1. It is vital to match control settings to your level of function

and ability.

2. Consult your health care professional and your supplier to

select the best control settings for you.

3. Check and adjust the settings every six to twelve months.

WARNING

Adjust the control settings immediately if you notice any change in

your ability to:

• Control the joystick.

• Avoid running into objects.

G. ON BOARD PROGRAMMER OR DTT

(DIAGNOSTIC TEST TOOL) OR RNET PC

PROGRAMMER

(Optional)

WARNING

Program settings beyond the ability of the user can result in seri-

ous injury. Consult your health care advisor before you alter set-

tings.

The On-board Programmer or RNET PC Programmer lets you

adjust the control settings of the QM-710. Listed below are a few

of the many settings that can be adjust via the On-board

Programmer or RNET PC Programmer. (See RNET OBP Owners

Manual for full programmable parameters.)

• acceleration rate

• deceleration rate

• turn acceleration

• turn deceleration

• forward speed (max & min)

• reverse speed (max & min)

• turn speed (max & min)

• steer correct

Programming the Chair:

a. Access via DTT (Diagnostic Test Tool), or the PC

Programmer require an inline

connection to the communication cable.

b. Program as needed.

c. Remove Dongle or recycle power.

NOTE–

Review the RNET OBP Owner’s Manual for more details on how

to program your chair.

H. JOYSTICK STATIONARY

Your chair has an available programming feature called “Joystick

Stationary” which can be set by your dealer. This feature senses

when the joystick is displaced from neutral, yet left in a steady posi-

tion for a predetermined period of time. The controller will auto-

matically turn off if the set time has been reached. This feature is

designed to protect the user, batteries and electronics if the joystick

is inadvertently displaced. There are two parameters that can be

adjusted:

IX. CONTROLS, JOYSTICK & OPERATING GUIDE

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

Comments to this Manuals

No comments

Quickie QM-7 Series Owner's Manual Page 22

Comments to this Manuals