Quickie Jive Specifications download pdf (Page 50)

50 Quickie Jive

14.3 Removing the RWD/FWD castor wheel.

Note the position of the castor & which hole is used to

mount it. Ensure that both castors use the same mount

position.

Use a 5.0mm hex key remove the 2 axle studs, •

(Fig.14.13).

Remove the centre spacers and spindle, (Fig.14.14).•

For pneumatic tyres,

let the air out of the tyre. •

Undo the 3 hub studs, (Fig.14.15). •

Lift the hubs out, (Fig.14.16).•

Gently feed the tube out of the tyre, (Fig.14.17)•

When refitting the hub studs, tighten to a torque of •

15-20Nm.

Fig. 14.13

Fig. 14.14

Fig. 14.16

Fig. 14.17

Fig. 14.15

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

No comments

Quickie Jive Specifications Page 50