Quickie Rhythm Owner's Manual download pdf (Page 17)

VIII.

F. JOYSTICK

Controls:

• LED Joystick and color display joystick

Omni Input/Display

The Omni is a universal specialty controls interface that accepts signals from many different

types of SIDs and translates them into commands compatible with the PG Drives Technology

RNET control system.

Mating Connectors

To connect the communication cables:

Holding the connector housing, firmly push the connector into its mate until you can

no longer see the yellow plastic. The connectors are secured using a friction system.

To disconnect the communication cables:

Holding the connector housing firmly, pull the connectors apart.

NOTE– Do not hold or pull on the cable. Always grip the connector when connecting and disconnecting.

When the control system is first switched on after a connection, or system component

change, the timer will be displayed while the system checks itself. Then the re-start icon will

be displayed. Switch the control system off and on again to operate,

G. JOYSTICK RETRACTABLE MOUNT (Optional) (Fig. 10)

The joystick or Enhanced Display is mounted with a mechanism which allows the control to

be locked in a forward or retracted position using magnets.

Adjustment

a. To retract the joystick, push outward on the inside of joystick.

b. Push the joystick away from front of armrest until it locks into retracted position.

c. To return to forward position, push the joystick forward until it locks into place.

H.DUAL-POST HEIGHT-ADJUSTABLE ARMRESTS (OPTION),

FIXED HEIGHT STANDARD

The dual-post flip-back armrest can be used as either a flip-back armrest or a removable

armrest.

1. Installing Armrest

a. Insert front and rear posts into armrest receivers.

b. Engage levers (A and B) to secure armrest.

2. Set-up for Flip-back Operation

a. Disengage lever (A) so front post is able to come free.

b. Armrest now has the ability to be flipped back without removal.

3. Set-up for Removal

a. Disengage levers (A and B) so front and rear posts are able to come free.

b. Armrest can now be easily removed for transferring.

4. Height-Adjustment (option)

a. Release the upper securing lever (C).

b. Set at desired height

c. Return securing lever to locked position.

d. Move armrest up or down to allow armrest to snap into place

112670 Rev. A

RHYTHM

ower

odule

LCD screen

Profile

+/-

Navigation

Mode

On/Off

LED Joystick Color Joystick

joystick

communication

cable

Omni Display

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Comments to this Manuals

No comments

Quickie Rhythm Owner's Manual Page 17

Comments to this Manuals

Related products and manuals for Scooters Quickie Rhythm