Quickie Rhythm Owner's Manual download pdf (Page 19)

VIII.

SEATING SYSTEM SET-UP

A. ASAP SEATING ADJUSTMENT

Please refer to the ASAP Seating Adjustment Guide for details on how to adjust the seat

depth, seat width, armrest height and backrest angle.

Pretilt

• For 0° pretilt use holes 3 & 6 (Fig. 4) on bracket interface with hole B (Fig. 1)

on curved bracket.

• For 5° pretilt use holes 3 & 6 (Fig. 4) on interface with holes B & C (Fig. 2)

on curved bracket.

• For 9° pretilt use holes 3 & 6 (Fig. 4) on interface with holes A & C (Fig. 3)

on curved bracket.

B. SEAT PAN AND BACK SIZE ADJUSTMENTS

Your Perfect Fit seating system can be adjusted to a wide range of widths and depths to

accommodate specific user needs. Seating dimensions should only be altered by a trained

professional and may require new seat cushions. Please refer to the Perfect Fit Growth

Guide for more detailed instructions on how to customize the size of your seat.

C. PRE-TILT (PACKER MODULE ONLY)

The Packer Module can be mounted with the use of an additional mounting bracket to pro-

vide four different pre-tilt settings (0°, 3°, 6°, 9°). Figure 4 demonstrates these angles and

how they can be achieved using the mounting bracket and two sets of screws. To achieve 0°,

the Packer Module should be bolted directly to the seat frame interface.

SEATING SYSTEM ADJUSTMENT

A. MANUAL RECLINE OPERATION

The Perfect Fit seating system has two manual recline options. The first is using a 16mm

socket wrench and the second can be done by turning a knob on the side of the chair (Figure

5). To recline the chair, rotate this knob clockwise and turn the knob counter-clockwise to

return the back to a more upright position.

B. POWER RECLINE TILT/LIFT OPERATION

The power recline, tilt, and lift features on your chair can all be operated using the joystick on

your chair. Follow the instructions below to operate:

1. Make sure your controller is on.

2. From the Drive Mode, press the Mode button to enter Power Seating Mode.

3. Move the joystick left or right selecting the power option (recline, tilt, legrests) you

wish to control.

4. Move the joystick forward or backward to adjust the selected power option to the

desired position.

5. Press the Mode button to return to normal operation or continue moving the joystick

left or right to adjust the next power option. Multiple Mode button presses will be

necessary if other modules, such as Bluetooth or Output, are active.

112670 Rev. A

RHYTHM

For 0° pretilt use Hole B

For 3° pretilt use Hole C

For 6° pretilt use Hole D

For 9° pretilt use Hole E

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Comments to this Manuals

No comments

Quickie Rhythm Owner's Manual Page 19

Comments to this Manuals

Related products and manuals for Scooters Quickie Rhythm