Quickie QM-7 Series Service Manual download pdf (Page 69)

QM-7 SERIES SERVICE MANUAL

PAGE 8.1

JANUARY 2012SUNRISE MEDICAL

Section 8

ASAP II Seating 16” - 20” wide is shown.

The ASAP II seating system is fully adjustable

to allow changes from 16” to 20” or 18” – 22”.

This requires a frame weldment and seat pan

plates adjust for seat growth. The picture shown

in (figure 8.1.1) has a seat width of 20” . This

detail shows how easy it is to change back to

16” wide.

To make seating width adjustments follow the

following steps:

1. Have 3mm – 4mm – and 5mm Hex keys

available for the adjustments.

2. Loosen (do not remove) all of the M5 Button

Head Cap bolts (A) (figure 8.1.1). with a 4mm

Hex key, or a T-handle Hex key so that the

plates can slide for adjustment.

3. Using a 5mm Hex key, remove the socket

head cap screws (figure 8.1.2) that attach the

left and right wings to the seat frame.

4. Remove the 5mm socket head bolts with a

Hex key that are used to hold the bottom of the

seat pan in place (figure 8.1.3) – totally remove

from its position so that seat pan plates can slide

for adjustment.

Adjustment procedures

fig. 8.1.1

fig. 8.1.2

fig. 8.1.3

Seat/Back Width adjustment

Note: The same procedure is used for the 18" - 22" wide seating system

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 82 83

No comments

Quickie QM-7 Series Service Manual Page 69