Quickie Hula Technical Information Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
18 HULA
Rev.1.0
5.5 Control pod joystick unit position
WARNING!
Make sure that the control pod/joystick is mounted •
securely and that the joystick position is correct.
The hand or limb you use to operate the joystick •
should be supported, for example by the arm pad.
Do not use the joystick as the sole support for your •
hand or limb - wheelchair movements and bumps
could upset your control of the joystick.
The control pod/joystick is mounted on a sliding
mechanism which enables the control to be moved
forwards and backwards.
Undo the locking screw, (Fig.5.4).•
Slide the control arm either out or to its new position, •
(Fig 5.10).
When the most comfortable position has been •
selected, secure the slider by tightening the locking
screw.
WARNING!
Ensure the locking screw is fully tightened prior to use,
especially when transporting your wheelchair.
5.6 Getting ready to drive
Operate the on/off switch. The battery gauge will blink •
then remain on after a second
Check that the maximum speed is set to a level which •
suits you.
Push the joystick to control the speed and direction of •
the wheelchair
Fig. 5.10
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 55 56

Comments to this Manuals

No comments