Quickie Hula Technical Information Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
HULA 23
Rev.1.0
5.7.3 Arm pad Position Adjustment
(Fig.5.30-5.33)
Fine arm pad position adjustments (2.5cm-5.0cm, 1”-2”)
are possible by loosening the 4mm arm pad adjustment
bolts (E) and sliding the arm pad forward or backward as
required, (Fig.5.30, 5.31). Access to the rear adjustment
bolt may require pivoting the arm pad
Retighten both adjustment bolts (E). Use 10 Nm or
88.5lbf/in of torque, (Fig.5.32).
NOTE: If more than one to two inches of adjustment is
required, refer to chart below, (Fig.5.33).
For larger adjustments, remove both sets of arm pad
adjustment bolts. Slide both arm pads to the next set of
attachment holes (refer to the chart). Retighten both sets
of arm pad adjustment bolts, (Fig.5.30 - 5.33). Use 10 Nm
or 88.5lbf/in of torque.
Fig. 5.30
Fig. 5.31
Fig. 5.32
ARM PAD DEPTH
(mm)
ARMREST HEIGHT
RANGE (mm)
ARM PAD SETTING POSITION
305 305 - 229 A & C
330 305 - 229 A & C
356 305 - 229 B & C
381 305 - 229 B & C
406 305 - 229 B & D
ARMREST
HEIGHT
ARM PAD
DEPTH
Fig. 5.33
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Comments to this Manuals

No comments