Quickie Hula Technical Information Page 47

  • Download
  • Add to my manuals
  • Print
  • Page
    / 56
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 46
HULA 47
Rev.1.0
Fig.12.1
Fig.12.2
Fig.12.3
Fig.12.4
Fig.12.5
Fig.12.7
Fig.12.8
12.3 Castor wheel replacement
To remove the Castor Wheel
Ensure that the wheelchair brake release •
levers are in the DRIVE position.
With all wheels still on the ground, use a •
17.0mm spanner and a 14.0mm socket wrench
to partially loosen the axle nuts, (Fig.12.8).
Lift the wheel off the ground & secure the •
wheelchair with blocks or stands, (Fig.12.9).
Withdraw the loosened axle stud, (Fig12.10).•
Note that there are spacers between the •
castor forks and wheel, (Fig.12.11).
To refit, just reverse the above process.•
Tighten the castor axle stud to a torque of •
15Nm.
Please see overleaf for (Fig.12.9-12.11).
Fig.12.6
Page view 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 55 56

Comments to this Manuals

No comments