Quickie Jive Specifications Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
22 Quickie Jive
5.8.6 Powered centre mount leg rest, (PCML).
WARNING!
There is an option on the programme of the leg rest that
allows you to send the footrest to the floor to allow for
easier mounting and dismounting for the user. Be aware
that when powered the area around and underneath
the footplate needs to be clear of all personal items and
bodily extremities to prevent injury or damage to property.
CAUTION!
Once the leg rest is fully lifted or in its lowest position do
not hold the joystick in its operating position as this could
damage the actuator.
To operate the PCML (Fig 5.25):
To operate the leg rest using VR2 Control, (Fig.5.24):
Push one of the actuator buttons that has the seat
icon on it to select actuator mode.
Operate the joystick left or right to select the actuator
required (actuator 1 or actuator 2). Selection is
indicated via the lighting of the red LED adjacent to
the desired actuator button.
Operate the joystick in the forward or rearward
direction to move the leg rest/seat lift/tilt or recline up
or down.
Release the joystick when the desired angle is
reached.
To return to drive mode press the actuator button
again.
R-net Control
Please refer to your R-net Owners Manual for
details.
6.0 Seating
6.1 Seat cushions
Seat cushions supplied by Sunrise Medical will have
Velcro® strips that correspond to patches on the seat.
WARNING!
You must ensure the strips are aligned prior to using
the wheelchair.
Other cushions used should also have Velcro® strips
in a similar position to ensure the cushion does not
slip off the seat.
NOTE: The seat cushions, supplied by Sunrise Medical
all have removable covers.
6.2 Changing seat depth on the standard rehab seat
Loosen the arm rest width adjustment screws, using
a 13.0mm spanner, (2 and 3, Fig 6.1).
Loosen the Mechani cal Fixed Recline/ Gas Strut /
electric Actuator fixing screws, (1 and 2, Fig 6.2).
Repeat for the other side.
Slide the inner seat frame to the desired position.
Tighten all screws, (Fig.6.1-6.2).
WARNING!
Sunrise Medical strongly recommend that you
contact your approved Sunrise medical servicing
agent to carry out this task.
Fig.5.25
Fig.6.1
1
2
3
4
Fig.6.2
1
2
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments