Quickie Jive Specifications Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Quickie Jive 33
10.0 Controller Mounts
10.1 General warnings
WARNING!
Do not replace the joystick knob with any
unauthorised item. It may cause hazardous operation
and loss of control of the chair.
It is important that the joystick boot is replaced if it is
torn or brittle; failure to do so could cause substance
damage to the controller and unexpected movement
of the chair.
Ensure that you always have comfortable access to
the controls whilst the chair is moving and make sure
that the controller is fixed securely to the chair.
WARNING!
To avoid unexpected or unintentional movement of
the wheelchair and to conserve battery power, it is
recommended that the control system is switched
Off when drive or seating adjustments are not being
used.
10.2 Parallel swing-away general warnings, (Fig.10.1)
WARNING!
Before adjusting the swing-away arm, switch off the
controller to avoid accidental displacement of the
joystick which would cause unwanted movement of
your wheelchair.
Be aware that the width of your chair has increased
if the swing-away arm is out and you may not get
between certain obstacles.
Do not hang any items on or over the parallel swing-
away remote assembly as this could damage the
swing-away mechanism.
When transferring to and from the wheelchair do not
use the remote as a means of support.
Ensure the power is switched off while adjusting the
parallel swing-away arm.
Only operate the wheelchair at low manoeuvring
speed when the parallel swing-away is in use. (See
“parallel swing-away” picture on the right).
10.3 Attendant control, (Fig.10.2)
WARNING!
Ensure that you set the speed of the attendant
control to a speed that you can comfortably follow.
Always turn off the power to the controller when
leaving the user in the chair.
Fig. 10.1
Fig. 10.2
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Comments to this Manuals

No comments