Quickie Jive Specifications Page 24
- Page / 60
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
24 Quickie Jive
6.10 Manual setting of the seat angle on the Jive
To set the seat angle, release the bolt fixing the “Banana”
bracket between the seat interface module and the seat
packer module. Set the seat angle at 0°, 3° or 6° and
9°, then replace and re tighten the bolt between the seat
interface module and the seat packer module. (Fig. 6.10).
6.11 Powered Seating
WARNING!
The Jive F-XL cannot be fitted with powered options.•
It is possible to reverse the direction of an actuator •
relative to the direction of the joystick. Ensure you
know which direction to move the joystick for the
desired operation. Failure to do so may result in
damage and/or injury.
Powered seat functions can be operated in “latched” •
mode. To stop a latched seat function before the end
of travel, operate the joystick in the reverse direction.
NOTE: Please refer to Section 7 for details of your hand
controls.
6.11.1 Powered adjustable backrest
The backrest can be reclined by operating your control
system as follows:
VR2 Control:
To recline the backrest angle:
Push one of the actuator buttons that has the seat •
icon on it to select actuator mode.
Operate the joystick left or right to select the actuator •
required (actuator 1 or actuator 2). Selection is
indicated via the lighting of the red LED adjacent to
the desired actuator button.
Operate the joystick in the forward or rearward •
direction to move the recline up or down.
Release the joystick when the desired angle is •
reached.
To return to drive mode press the actuator button •
again.
6.7 Manual adjustable backrest (manual recline)
For depth adjustment see section 6.2.
To recline the backrest angle, pull the lever at the top of
the backrest which operates the gas strut. Hold the lever
and adjust the back angle required. If you release the
lever, the angle will stay in the adjusted position. If you
want to adjust the backrest into the upright position, you
might need to support the upward motion (Fig. 6.8).
6.8 JAY backrests
The standard backrest assembly will allow the fitting of a
JAY backrest, which is available as an optional extra.
6.9 Headrest
To fit the headrest, fit the location bracket to the backrest
bracket, using the screws and nuts supplied, ensuring
that they are fully tightened.
The headrest height is changed by loosening the
adjustment lever on the stem, slide the inner vertical
tube to the desired position and tightening the lever.
The headrest to seat depth is adjusted by loosening the
6mm Allen screws and moving the hinge to the desired
position and then tightening the screws securely. To
adjust the headrest angle, loosen the screws at the
headrest upholstery, position the headrest as required
and tighten the screws securely.
Fig.6.8
Fig.6.9
6°
9°
0°
3°
Fig.6.10
- Quickie Jive 1
- User Information 3
- Area of application 3
- Mid Wheel Drive (MWD) 4
- Rear Wheel Drive (RWD) 5
- Front Wheel Drive (FWD) 5
- 6 Quickie Jive 6
- Quickie Jive 9 9
- Labels and their descriptions 9
- Fig. 4.1 10
- Fig. 4.2 11
- Quickie Jive 13 13
- Fig 4.3) 15
- and removal procedure 16
- (RWD base only) 16
- Quickie Jive 17 17
- Fig.5.8.1 19
- Fig.5.10 19
- Fig.5.21 Fig.5.22 21
- Fig.5.23 21
- Fig.5.24 21
- 6.0 Seating 22
- Quickie Jive 23 23
- Fig.6.10 24
- Fig.6.11 25
- Fi g.7.1 26
- Quickie Jive 27 27
- Fig. 7.2 28
- Quickie Jive 29 29
- Fig. 7.3 29
- Fig. 7.4 29
- Fig. 7.5 30
- Quickie Jive 31 31
- 9.0 R-net Control System 32
- 10.0 Controller Mounts 33
- Fig. 10.3 34
- Quickie Jive 35 35
- Fig. 10.4 35
- 11.0 Speciality Controls 36
- 12.0 Batteries and charging 38
- Charging Socket 40
- Quickie Jive 41 41
- 13.0 Transportation 42
- Quickie Jive 43 43
- Fig.13.3 43
- TIE DOWNS 45
- Fig.13.15 46
- Fig.13.17 46
- Fig.13.18 46
- Fig.13.19 46
- Quickie Jive 47 47
- Fig. 14.1 47
- Fig. 14.2 47
- 48 Quickie Jive 48
- Quickie Jive 49 49
- Fig. 14.11 49
- Fig. 14.12 49
- Quickie Jive 51 51
- Fig. 14.18 52
- Fig. 14.19 52
- Fig. 14.20 52
- Fig.14.28 54
- Fig.14.27 54
- Quarterly 55
- Six month 55
- Annually 55
- 16.0 Service History 59
- 17.0 Disposal 59
- Ref: P19093 60
Related products and manuals for Unknown Quickie Jive
Unknown Quickie Rhythm User Manual
(4 pages)
(4 pages)
Unknown Quickie Q7 Adjustable User Manual
(24 pages)
(24 pages)
Unknown Quickie Argon2 User Manual
(38 pages)
(38 pages)
Unknown Quickie Salsa M User Manual
(170 pages)
(170 pages)
Unknown Quickie S-636 User Manual
(7 pages)
(7 pages)
Unknown Quickie Rumba Modular User Manual
(86 pages)
(86 pages)
Unknown Quickie S-646 SE User Manual
(20 pages)
(20 pages)
Unknown Quickie Xenon SA User Manual
(8 pages)
(8 pages)
Unknown Quickie Groove User Manual
(355 pages)
(355 pages)
Unknown Quickie Jive User Manual
(196 pages)
(196 pages)
Unknown Quickie 2HP User Manual
(4 pages)
(4 pages)
Unknown Quickie Hula User Manual
(4 pages)
(4 pages)
© 2020, manymanuals.com. All rights reserved. | 0.583 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals