Quickie Jive Specifications Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
Quickie Jive 55
Joystick gaiter:
Check the thin rubber gaiter or boot around the base of
the joystick shaft for damage or splitting. Check visually
only, do not handle the gaiter.
Mounting:
Make sure that all components of the control system
are securely mounted. Do not over-tighten any securing
screws.
Please refer to Service manual for any
information about Torques.
Switch on the hand control – Do the lights flash? This
signifies that there is a fault in the electronic system.
Refer to section 8 for basic troubleshooting
Operate all of the electric options, including lights and
indicators (if fitted) to make sure that they work correctly.
With the seating in an elevated position, drive the
wheelchair to make sure that the ‘creep’ mode works
which will slow the wheelchair.
Drive the wheelchair in each of the drive profiles to make
sure the wheelchair performs as it did before.
WARNING!
If you are in any doubt about the performance
requirements of your wheelchair contact your
Sunrise Medical authorised dealer.
After performing any maintenance or repairs on the
wheelchair you must make sure that it is functioning
correctly before it is used.
A complete inspection, safety check and service
should be made by a Sunrise Medical authorised
dealer at least once per year.
Maintenance and Inspection Schedule
Daily
Weekly
Quarterly
Six month
Annually
Check battery level indicator and charge if necessary
¯
Check the joystick of the hand control is not bent or damaged
¯
Ensure all removable parts are securely locked in place
¯
Check lap strap for wear and make sure the buckle is operational
¯
Parking brake test
¯
Check tyres and inflate
¯
Ensure lights and indicators are operational and clean
¯
Ensure all cables and connectors are sound and are tidy and out of the way
¯
Clean wheelchair and upholstery
¯
Battery terminal inspection – Remove any corrosion and apply Petroleum
jelly
¯
Apply general purpose grease to square runners to tilt and lift runners (if
fitted)
¯
Check upholstery, seating, headrests, armpads and calfpads for wear
¯
WARNING!
Complete inspection, safety check and service should be made by a
Sunrise Medical authorised dealer
¯
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments