Quickie Jive Specifications Page 29
- Page / 60
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Quickie Jive 29
7.11 Charging and programming socket:
(Fig.12.8-12.10)
WARNING!
This socket should only be used for programming and
charging the wheelchair.
This socket should not be used as a power supply for any
other device.
Connection of other electrical devices may damage the
control system or affect the EMC performance of the
wheelchair.
See Section 12.0 about charging.
The programming socket will enable an approved
Sunrise Medical authorised dealer to re-programme your
chair and also gain useful information when tracing any
faults. When the chair leaves the factory, the parameters
of the controller are set to default.
To programme the controller you need a special
programming device (handheld or PC software), which is
available to your Sunrise Medical authorised dealer.
WARNING!
Programming the controller of the wheelchair is only
allowed through authorised personnel trained by Sunrise
Medical. Incorrect controller settings could cause driving
outside the safe limits and could result in damage or
injury.
NOTE: Sunrise Medical does not accept responsibility
for damages which result from unexpected movement
or stopping of the wheelchair due to inappropriate
programming or unauthorised use of the wheelchair.
7.12 VR2 dual control unit:
7.13 Control button and indicator:
This shows which joystick has control. If the red
wheelchair light is on the wheelchair occupants joystick
has control. If the green attendant light is on the dual
attendant systems joystick has control. The button
is used to transfer control between the two choices,
(Fig.7.4).
7.14 Actuator button and LED:
All VR2 dual attendant systems have an actuator button
fitted as standard. If the VR2 is programmed with no
actuators then this button has no function, (Fig.7.4).
Wheelchairs with one actuator:
Depressing the actuator button once will enter actuator
adjustment mode. This will be indicated by the
illumination of both actuator LED’s. Actuator adjustment
can then be made by deflecting the joystick forwards and
backwards.
To re-enter drive mode, depress either the actuator
button or the speed button.
Wheelchairs with two actuators:
Depressing the actuator button will enter actuator
adjustment mode. Depressing the button once illuminates
the left LED and deflection of the joystick forwards
or backwards will adjust the actuator connected to
that channel. Selection between the two actuators is
achieved by deflecting the joystick to the left and right.
As the actuator selected changes so will the LED which
illuminates. Left for actuator 1 and right for actuator 2.
To re enter drive mode, depress either the actuator button
or the speed button.
CONTROL
PANEL
JOYSTICK
VR2 DUAL CONTROL UNIT
Fig. 7.3
CONTROL
BUTTON &
INDICATOR
LED’S
ACTUATOR
BUTTON
SPEED
INDICATOR
MAXIMUM
SPEED
BUTTON
Fig. 7.4
VR2 DUAL CONTROL UNIT
- Quickie Jive 1
- User Information 3
- Area of application 3
- Mid Wheel Drive (MWD) 4
- Rear Wheel Drive (RWD) 5
- Front Wheel Drive (FWD) 5
- 6 Quickie Jive 6
- Quickie Jive 9 9
- Labels and their descriptions 9
- Fig. 4.1 10
- Fig. 4.2 11
- Quickie Jive 13 13
- Fig 4.3) 15
- and removal procedure 16
- (RWD base only) 16
- Quickie Jive 17 17
- Fig.5.8.1 19
- Fig.5.10 19
- Fig.5.21 Fig.5.22 21
- Fig.5.23 21
- Fig.5.24 21
- 6.0 Seating 22
- Quickie Jive 23 23
- Fig.6.10 24
- Fig.6.11 25
- Fi g.7.1 26
- Quickie Jive 27 27
- Fig. 7.2 28
- Quickie Jive 29 29
- Fig. 7.3 29
- Fig. 7.4 29
- Fig. 7.5 30
- Quickie Jive 31 31
- 9.0 R-net Control System 32
- 10.0 Controller Mounts 33
- Fig. 10.3 34
- Quickie Jive 35 35
- Fig. 10.4 35
- 11.0 Speciality Controls 36
- 12.0 Batteries and charging 38
- Charging Socket 40
- Quickie Jive 41 41
- 13.0 Transportation 42
- Quickie Jive 43 43
- Fig.13.3 43
- TIE DOWNS 45
- Fig.13.15 46
- Fig.13.17 46
- Fig.13.18 46
- Fig.13.19 46
- Quickie Jive 47 47
- Fig. 14.1 47
- Fig. 14.2 47
- 48 Quickie Jive 48
- Quickie Jive 49 49
- Fig. 14.11 49
- Fig. 14.12 49
- Quickie Jive 51 51
- Fig. 14.18 52
- Fig. 14.19 52
- Fig. 14.20 52
- Fig.14.28 54
- Fig.14.27 54
- Quarterly 55
- Six month 55
- Annually 55
- 16.0 Service History 59
- 17.0 Disposal 59
- Ref: P19093 60
Related products and manuals for Unknown Quickie Jive
Unknown Quickie Rhythm User Manual
(4 pages)
(4 pages)
Unknown Quickie Q7 Adjustable User Manual
(24 pages)
(24 pages)
Unknown Quickie Argon2 User Manual
(38 pages)
(38 pages)
Unknown Quickie Salsa M User Manual
(170 pages)
(170 pages)
Unknown Quickie S-636 User Manual
(7 pages)
(7 pages)
Unknown Quickie Rumba Modular User Manual
(86 pages)
(86 pages)
Unknown Quickie S-646 SE User Manual
(20 pages)
(20 pages)
Unknown Quickie Xenon SA User Manual
(8 pages)
(8 pages)
Unknown Quickie Groove User Manual
(355 pages)
(355 pages)
Unknown Quickie Jive User Manual
(196 pages)
(196 pages)
Unknown Quickie 2HP User Manual
(4 pages)
(4 pages)
Unknown Quickie Hula User Manual
(4 pages)
(4 pages)
© 2020, manymanuals.com. All rights reserved. | 0.216 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals